Antique Hand Cranked Hammer Drill - Restoration

  • нийтэлсэн 4 сарын өмнө

    my mechanics

    Үргэлжлэх хугацаа: 26:34

    It was in spring this year when I picked up this beaten up antique hand cranked hammer drill. My friend has found it on the steel waste together with the german „Weltrekord“ ratchet screwdriver. The condition of the drill was super bad. It was very corroded, had a lot of missing screws, the handle was in very bad condition and the crank was bent so much you couldn't even make a full turn. That's all said, it was the perfect item for a new restoration video.
    At first I thought this should be a quick and easy project, but one problem after the other became visible and it turned out to be a real challenge. There was the big dent in the left side of the case. Usually you can't bend casted parts, but with a bit of heat and careful pressure on the arbor press I was able to remove it a bit. It also worked to get rid of the warping with some heat. For the finish of the housing I wanted to have an antique cast aluminium look. I thought it would look very cool if I could tumbler these parts after sandblasting. I ended up building a huge rotary tumbler from scratch and it worked very well (video link below).
    Another big issue was the tool holder and the drill bit, as they were both completly rusted. Big thanks to @Hand Tool Rescue at this point for helping me out with the dimensions on these two parts by disassembling and measuring his own hammer drill. After a bit of search on eBay I found a set of original Rawlplug drill bits. After they arrived I was able to measure the shaft and the taper of the drill to then turn a new tool holder. It all worked out very well and yes, the drill only holds with the taper ;-)
    Before I even started this project I just had one question in mind „How am I going to replace the messed up handle cover?“. My first idea was to wrap it in nice black leather like steering wheels are made. That would definitely work, but that's something I've never done before so I was quite sceptical. Then the idea of a heat shrink tube came up. That would be a very easy solution, but heat shrink tubes don't have any structuires to it and it wouldn't quite fit the the rest of the tool. Thanks to the research of my Patreons and channel members, they have found very special heat shrink tubes that have a structure in it. I really liked it as it almost looked exactly the same like the original handle.
    After all it was a very intense and time consuming project. I've done so many hours of research on this one and I had to learn new skills. I'm very happy how it turned out.
    I hope you like my work and the video.
    Huge thank you to all of my Patreon supporters and specially to:

    Tonya M Broerman
    Zack Thompson
    Adel AlSaffar
    afreeflyingsoul
    Yale Baker
    Gregory
    Alex McGeorge
    Alistair Moor
    Amar.k
    Bendurion
    Courtney Maleport
    David Barker
    Greg Marston
    Joshua Bentley
    Lambda GPU Workstations
    Luke Schmick
    Luke Stone
    Matt Bosch
    Mellissa Marcus
    Mike Schlodder
    Monte Gibbs
    Muzaffer Aksoy
    Nick Houston
    Paul Mampilly
    potokslow
    Todd Medbury
    Vickie Bligh
    Vince Valenti
    Xavier Carbel
    Yuri Zapuchlak
    Aaron Quante
    Alex Breton
    alex latzko
    Allen Frank
    Amanda Taylor, Esq
    Andreas Mimra
    Andrew Phillips
    Anthony Adams
    Arni Bjorgvinsson
    audi4444player
    Blake T
    Brandon Fitzwater
    Brian Newton
    Carlo
    Chad Bryant
    Chris Simondet
    Grok Senften
    Haley McFadden
    Harper Kim
    Hunter R.
    Jason Koi
    Jason Tarlov
    Jeremy Cole
    Jonas Richartz
    Jordan Page
    justin f.
    Kelly Imgrund
    Kurt Gazow
    Marc Cerisier
    Marius Costan
    Martin Rønnow Klarlund
    Mellissa McConnell
    Michael Bier
    Mickey Eisenhorn
    Mike Donaldson
    Nick Cannon
    Pasacal Schmikal
    Philipp
    Schultes Thomas
    Scott Marshall
    Sergei Shvartsman
    Svenja Kuckla
    The Carlsons
    Trevor Kam
    Tucker Ifft
    Warren G Strand Jr
    William Wallace
    웅록 윤

    My camera:
    Panasonic HC-VX11

    If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
    Sorry for my bad english, it's not my language. I try my best to improve my technical english.
    Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
    Thank you for watching :-)

    Building a Huge Rotary Tumbler from Scratch - Homemade Rotary Tumbler
    mnglobal.info/dev/lmRpqGeNfnKgsMY/video
    „I make a new one“ T-Shirts:
    teespring.com/stores/my-mechanics
    My Main Channel:
    mnglobal.info
    My Second Channel:
    mnglobal.info/match/4EQCwfH54ieNPswtXh5K0w.html
    My Patreon Page:
    www.patreon.com/mymechanics
    Follow me on Instagram:
    my_mechanics
    My Facebook Page:
    My-mechanics-1966277857002099/

StoneSymmetry
StoneSymmetry

What kind of paint is that?

12 цагийн өмнө
dethmaul
dethmaul

Visual ASMR. i love watching the macro style shots.

12 цагийн өмнө
Thomas Mills
Thomas Mills

All is extraordinary. ...except the handle. Even if that was how it was originally it just looks cheap. Whether shrink tubing is cheap or not.

13 цагийн өмнө
pat o'rourke
pat o'rourke

Just awesome, the best since the tire pressure gauge. When I win the lotto this is what I will be doing.

14 цагийн өмнө
M. MAQSOOD
M. MAQSOOD

You are the best best best best.

15 цагийн өмнө
Victoria Yakovleva
Victoria Yakovleva

Супер, браво!!!

18 цагийн өмнө
مدينتي النجف
مدينتي النجف

Nayc Lovr

19 цагийн өмнө
Lambor_ghini
Lambor_ghini

Nice restoration! I probably wouldn't carry that thing in public.. it might attract some callers, someone might mistake it for a semi-automatic rifle!

23 цагийн өмнө
Ibrahim Selhami
Ibrahim Selhami

What is that 🙄😒

Өдрийн өмнө
M. Rafeeq
M. Rafeeq

U

Өдрийн өмнө
Jaun Antonio Pérez Reyes
Jaun Antonio Pérez Reyes

0 9

Өдрийн өмнө
Matthew Sykes
Matthew Sykes

Awesome, a thing from the time we brits actually made something. Quite badly judging by the castings, it worked just didn't look very eye catching but what do you expect, a Gucci Hand cranked hammer drill..... function over form. Got to admire your talents though, superb job every time.

Өдрийн өмнө
halladall1
halladall1

What is the bluening for?

Өдрийн өмнө
Ratas Hussain Explorer
Ratas Hussain Explorer

Nice

Өдрийн өмнө
MIDIGSAAR
MIDIGSAAR

This guy is a real master, what a professional end!

Өдрийн өмнө
Amanda Reckonwith
Amanda Reckonwith

You make it all look so beautifully easy!

Өдрийн өмнө
David Shuff
David Shuff

How long to complete?

2 өдрийн өмнө
KangNo Chanel
KangNo Chanel

Hello vidios oke love❤️❤️❤️from Indonesia👍🏾👍🏾👍🏾👍🏾

2 өдрийн өмнө
goober
goober

I was like, this looks like a good quality tool....then I saw the British made.... That's why!!!!

2 өдрийн өмнө
Irmgard Luckhardt
Irmgard Luckhardt

super!

2 өдрийн өмнө
Вадим Кузнецов
Вадим Кузнецов

...если сказать что ты молодец!,- это значит не сказать ни чего!, меня удивляет другое!,-я про механический перфоратор первый раз увидел из твоего ролика, не знал, что бывает такая техника, а после восстановления-,выглядит лучше новой, такой перфоратор можно использовать в тех местах, где отсутствует электроэнергия, здоровья тебе и удачи во всём!!!

3 өдрийн өмнө
Diane Maher
Diane Maher

I wish you could work on a piece for. me! It's a typewriter crank.

3 өдрийн өмнө
Анвар Миф
Анвар Миф

Ёптиль моптиль ручной перфоратор =))))) Он существует блин мне бы такой соседей по баловать =)))))))))))))))

3 өдрийн өмнө
Политика завтра
Политика завтра

Привет канал 👍

4 өдрийн өмнө
The Lycan
The Lycan

That test was very satisfying to watch and hear oml

4 өдрийн өмнө
Jjrjdirir Ijdjrjrjfir
Jjrjdirir Ijdjrjrjfir

ش

4 өдрийн өмнө
Kimberley Davis
Kimberley Davis

It always amazes me when I watch these videos at how complicated some of these things are period from the outside it looks like 2 or 3 pieces like the gas lamp Yeah looked to be. And then when he takes the cover off it's a million pieces that he knows how to put back together!

5 өдрийн өмнө
Богдан Миров
Богдан Миров

В итоге что это такое 🤷‍♂️? Есть тут русскоговорящих 😂

5 өдрийн өмнө
John Lois
John Lois

What is this black paint

5 өдрийн өмнө
MIkeneko
MIkeneko

I LOVE YOU

5 өдрийн өмнө
Yalmaz Khan
Yalmaz Khan

When he applies black colour, it looks like my pc is not rendering the scene on my screen properly

5 өдрийн өмнө
serega mishenko
serega mishenko

Мастер! Супер! Пример всем!

6 өдрийн өмнө
Humanities Resistance
Humanities Resistance

The privilege you have and skill is uncanny

6 өдрийн өмнө
Juan C Ussa D
Juan C Ussa D

He is too good. Master on it! Bravo!

8 өдрийн өмнө
Majedeh Sedeh
Majedeh Sedeh

احسنت النشر بالتوفيق استمر

8 өдрийн өмнө
Владимир Пугачёв
Владимир Пугачёв

Слов нет. Хотя одно есть. ОХРЕНЕТЬ МОЖНО!!!

9 өдрийн өмнө
Вадим Кузнецов
Вадим Кузнецов

...это уже два слова!!!

3 өдрийн өмнө
hisham EF
hisham EF

at the beginning, I remember being in the middle of the desert

9 өдрийн өмнө
Respxct_Oni
Respxct_Oni

Fortnite players: it’s a harpoon gun

10 өдрийн өмнө
AG 17 OFFICIAL
AG 17 OFFICIAL

very professional and I like your content channel👍👍

11 өдрийн өмнө
Carry On
Carry On

It’s not really restoring if you are just going to make new parts but the video itself was good

11 өдрийн өмнө
Saren
Saren

Your videos are pure eye candy. Even the sandblaster power button.

11 өдрийн өмнө
Bill Randolph
Bill Randolph

No person is a better restorer than he.

11 өдрийн өмнө
Gabriela Oliveira
Gabriela Oliveira

Mano, coloca uma luva ai vei nmrl

11 өдрийн өмнө
Juicyy
Juicyy

mano poe uma luva ae parsa pelo amor de deus

11 өдрийн өмнө
Куба Куба.
Куба Куба.

Зачем я это смотрю?

11 өдрийн өмнө
Joshua Carbajal
Joshua Carbajal

I love that old things can be fixed because they’re not 95% plastic.

11 өдрийн өмнө
Bridger Barnes
Bridger Barnes

Do you do research on all the things you restore or just go with the flow?

12 өдрийн өмнө
Tráng Chứ
Tráng Chứ

ua mob nias qau kawg yom

12 өдрийн өмнө
VersuS Angel
VersuS Angel

What is the name of the black paint that you put on it? Sorry for my ignorance I'm Latino :c I love these videos

12 өдрийн өмнө
กัญญารัตน์ จันทร์พิมาย
กัญญารัตน์ จันทร์พิมาย

... I

12 өдрийн өмнө
กัญญารัตน์ จันทร์พิมาย
กัญญารัตน์ จันทร์พิมาย

Lip

12 өдрийн өмнө
SlyTreeRat
SlyTreeRat

Literally a surgeon with how well you restore some of these

12 өдрийн өмнө
Logan Edwards
Logan Edwards

I'd love to see you do a rifle restoration.

12 өдрийн өмнө
Eliel Milton
Eliel Milton

Extreme perfect

12 өдрийн өмнө
humerto diaz
humerto diaz

Buenisimo

13 өдрийн өмнө
Aziz Peregrino-Brimah
Aziz Peregrino-Brimah

Looks like a 1920's gun you aim and yell out "filthy copper!" LOL

13 өдрийн өмнө
Luis Cummins
Luis Cummins

Bro I can watch this all day. I subscribed. Awesome work! Cant imagine how long editing takes!

13 өдрийн өмнө
Manny From Miami
Manny From Miami

this needs to be a new CoD weapon

13 өдрийн өмнө
Gary Lang jr
Gary Lang jr

This should be titled make new parts for old tool

13 өдрийн өмнө
krumpi123
krumpi123

you kinda effed up the angle of the shoulder piece...

13 өдрийн өмнө
Volkan GÜNYELİ
Volkan GÜNYELİ

Nice job master 👍👌👏👏🙌🙂

13 өдрийн өмнө
Jay Gray
Jay Gray

Dope.

13 өдрийн өмнө
Federico Goetschy
Federico Goetschy

Admiro tu "mano de obra" de excelente calidad y prolijidad, así como también la amplia disponibilidad de elementos y herramientas que tienes para desarrollar tus trabajos que los considero rayano a la perfección..! ¡Felicitaciones..!!!! Saludos desde la Republica Argentina..!

13 өдрийн өмнө
URBEX TEAM FAMILY
URBEX TEAM FAMILY

c'est toujours très impressionnant! MERCI

13 өдрийн өмнө
Bruce Renoir
Bruce Renoir

How is it possible for this video to have 14 000 dislikes ?

14 өдрийн өмнө
Leonardo
Leonardo

top

14 өдрийн өмнө
Edsko de Vries
Edsko de Vries

One of your best projects for sure. What a masterpiece! Stunning work.

14 өдрийн өмнө
roberto villalobos
roberto villalobos

Excelente trabajo 👍 volvió a la vida esa herramienta muy bonita y compleja . Desde Venezuela ciudad Maracaibo

14 өдрийн өмнө
Данил
Данил

Классно. Только приклад изначально был вертикально,а в конце установили горизонтально )

14 өдрийн өмнө
Dio Benson
Dio Benson

I wish that I can buy the hammer drill

14 өдрийн өмнө
Леон Лофает
Леон Лофает

Я подумал что это архиологи нашли внеземное оружие пришельцев потерянное ими во время одного из посещений земли.

14 өдрийн өмнө
Fantastic Restoration
Fantastic Restoration

Fantastic work 🤩🤩🤩🌟

14 өдрийн өмнө
Dirk Bachman
Dirk Bachman

Parabéns este ser humano é espetacular ele tem um dom maravilhoso que presente de Deus cada coisa que ele faiz parece que não tem mais o que fazer é ele vai lá e da um jeito . Parabéns adoro seus videos sou de São Paulo Brasil abraços

15 өдрийн өмнө
Андрей Тула
Андрей Тула

Блестяще!

15 өдрийн өмнө
German Fernandez
German Fernandez

Another 1000 likes for you congratulations 😎

15 өдрийн өмнө
Jimenez83 Guribe
Jimenez83 Guribe

Wapo k trabajo bien echo

15 өдрийн өмнө
Mifzal Hilmiy
Mifzal Hilmiy

Orak konco kampung jrw tapi koncoku seng edan wong bangsri

16 өдрийн өмнө
Mifzal Hilmiy
Mifzal Hilmiy

Woi goblok video apik koncoku edan neh

16 өдрийн өмнө
Resto Work
Resto Work

A real machine gun :) MP40!!!

16 өдрийн өмнө
Christino Lian
Christino Lian

amazing

16 өдрийн өмнө
Jaskaran Singh
Jaskaran Singh

I wanna know how does it remember to put everything back ?

16 өдрийн өмнө
Joey Byrne
Joey Byrne

How do you remove your nuts and bolts with out sheeting them?!?!?😱

16 өдрийн өмнө
PRASAD MAJHI
PRASAD MAJHI

🌅 Jay Jagannath 💩 Sundar 🗽

16 өдрийн өмнө
MrZombie Brain
MrZombie Brain

i luv u

16 өдрийн өмнө
iyus mika
iyus mika

wht does it look like an smg

16 өдрийн өмнө
Riddhi Paul
Riddhi Paul

this looks like the negev gun from csgo

17 өдрийн өмнө
Heman Gi
Heman Gi

Oh my eyes

17 өдрийн өмнө
The Expert
The Expert

Master craftsman...you my dude r no joke.

17 өдрийн өмнө
Tasty Channel
Tasty Channel

Швейцарский Адвокат Егоров судя по наборам инструмента сделанного собственноручно!👍

17 өдрийн өмнө
Людмила Калмакова
Людмила Калмакова

Если человек творческий и руки растут откуда надо, ещё к этому прибавить любовь и творчество, то такие люди могли бы многое сделать, только вперёд

17 өдрийн өмнө
طيب لضل
طيب لضل

لالبيع اني اشتري

17 өдрийн өмнө
Romano Schwabel
Romano Schwabel

what blue fluid you put on that the metal get dark/black?

17 өдрийн өмнө
Mhmod Mhmod
Mhmod Mhmod

ايش هذا؟

17 өдрийн өмнө
pat walker
pat walker

Why 14k thumbs down ??? Some people are plain restarted lol Great job 👍

18 өдрийн өмнө
Phim Hoạt cảnh
Phim Hoạt cảnh

tuyệt vời!

18 өдрийн өмнө
Люба Кравцова
Люба Кравцова

Я думаю это ручная дрель т.е сверло

18 өдрийн өмнө
Family - Entertainment
Family - Entertainment

You can the plays ?

18 өдрийн өмнө
dakoy03
dakoy03

now this is ASMR

18 өдрийн өмнө
Isidro Rodríguez
Isidro Rodríguez

Art and technic of tools rehabilitation. That's great. Since Managua, Nicaragua.

18 өдрийн өмнө
Random Stuff
Random Stuff

Is there something that lathe can't do?

18 өдрийн өмнө

Дараах

1940s Rusty Oldtimer Scooter - Restoration

37:44

1940s Rusty Oldtimer Scooter - Restoration

my mechanics

Үзсэн тоо 427мянга.

Old Soviet motorcycle full Restoration

34:59

Old Soviet motorcycle full Restoration

Great idea

Үзсэн тоо 39сая

Morningstar - Haranhuil (Official Music Video)

3:22

Morningstar - Haranhuil (Official Music Video)

Monstar TV

Үзсэн тоо 92мянга.

The C - EFIL (Official Music Video) prod. MAEXST

2:42

The C - EFIL (Official Music Video) prod. MAEXST

Monstar TV

Үзсэн тоо 194мянга.

Beegii - Gobi vs Hangai

4:07

Beegii - Gobi vs Hangai

UB Comedy Club

Үзсэн тоо 86мянга.

Antique Hand Cranked Grinder - Restoration

23:47

Antique Hand Cranked Grinder - Restoration

my mechanics

Үзсэн тоо 12сая

1891 German ''Weltrekord'' Ratchet Screwdriver - Restoration

19:51

Making a Bowie Knife

23:29

Making a Bowie Knife

Leandro Goretta

Үзсэн тоо 242мянга.

ROLEX AMAZING TRANSFORMATION ASMR watch restoration Rolex airking 1940s tutorials

27:51

Antique Rusty Cleaver - Restoration

13:26

Antique Rusty Cleaver - Restoration

my mechanics

Үзсэн тоо 5сая

Antique Soldering Iron (Blowtorch) - Hot Restoration

22:52

Antique Soldering Iron (Blowtorch) - Hot Restoration

my mechanics

Үзсэн тоо 8сая

Antique Kitchen Scale Restoration - The Masterpiece

26:24

Antique Kitchen Scale Restoration - The Masterpiece

my mechanics

Үзсэн тоо 8сая

Antique Blowtorch Restoration - with testing!

18:56

Antique Blowtorch Restoration - with testing!

my mechanics

Үзсэн тоо 2,2сая

Morningstar - Haranhuil (Official Music Video)

3:22

Morningstar - Haranhuil (Official Music Video)

Monstar TV

Үзсэн тоо 92мянга.

The C - EFIL (Official Music Video) prod. MAEXST

2:42

The C - EFIL (Official Music Video) prod. MAEXST

Monstar TV

Үзсэн тоо 194мянга.

Beegii - Gobi vs Hangai

4:07

Beegii - Gobi vs Hangai

UB Comedy Club

Үзсэн тоо 86мянга.

Superheroes Car Race for 100 000 $

1:36

Superheroes Car Race for 100 000 $

FatTV

Үзсэн тоо 1,8сая

BTS (방탄소년단) 'Dynamite' @ 63rd GRAMMY Awards Show

3:01

ЯПОНЫ ХАРААГДСАН ZOOM УУЛЗАЛТ (2021)

11:25

"Lower The Healthbar" | Animation | Cartoons | Pencilmation

30:29